SUS304 Bidirectional RFID Access Control Turnstile Gate Swing
The high-end series of turnstiles, the technological level and technical characteristics of the products have reached the top level of the domestic counterparts. After many exhibitions and promotion, the appearance, craftsmanship and performance of the products have been unanimously praised. It can highlight the advantages in the project's control points, and is the first choice for commercial office buildings, exhibition halls, clubs, and rail transit.
1. Anti-tailing function: There are infrared light band detection areas in the channel, and the switch state can be adjusted by software according to the customer's accuracy requirements. The application of light bands can adapt to different needs to avoid the shortcomings of point-type infrared detectors that are easy to be contaminated and affect the reliability of judgment. It can effectively determine the trailing party of the unread card. When the system determines that a trailing occurs, the system will react according to the position of the valid cardholder returned by the infrared detector. After the door open signal is issued, there are still some abnormal uses that will trigger an alarm.
2. Abnormal usage conditions:
(1) When the door is closed, the pedestrian enters in the reverse direction. After the authorized door opening signal is issued, the pedestrian enters the door, and before passing the first safety photoelectric detection belt, if the reverse detection belt detects that someone has entered, If the person does not leave, the buzzer will always sound the alarm, the door will remain closed, and the "aging" function will not calculate the time interval at this time.
(2) Reverse intrusion when the door is opened. After the door wing is opened, if an unauthorized pedestrian enters the door detection area in the reverse direction, the door will be closed immediately, as long as the first protective detection belt detects the presence of someone, "Time Limitation" The function does not calculate the time at this time, and the door resumes normal operation when the person leaves the second detection zone.
(3) When the pedestrian leaves, the pedestrian enters the second safety detection zone in the reverse direction. Before the door returns to the basic state, the second safety detection zone detects someone entering again without a legal door opening signal, and the alarm system issues an alarm. But as long as the protection detection area still detects people, the door will not close.
(4) Following closely from the first detector detecting the pedestrian to the last detector when he leaves the first safety detection belt, the time gap is about 0.25 seconds. After the pedestrian leaves the first safety detection belt, the reader signals Without opening the door, a pedestrian (trailing person) is detected in the first detection zone, the alarm sounds long, and the door remains open.
(5) After the normal trailing pedestrian leaves the protection detection zone, an unauthorized person is detected in the first safety detection zone, the door is immediately closed, and the alarm sounds long.
3. Drive: DC servo drive system and DC brushless drive system
4. The response of the door body in an emergency: When the door is in operation, there is a sudden power failure, the door wing will stop at the original position and can be pushed freely, or an external 12V battery can be connected (when the power is cut off, the battery will be briefly energized to open the swing door) According to requirements, each device can be equipped with an emergency button, and the selected emergency response mode can be activated by pressing the button. Under normal circumstances, the channel is opened in danger or panic. In emergencies, such as police and police, the channel can be closed manually through the remote control button. After power-on or in an emergency, the door wing will automatically reset after self-checking without obstacles.
1. Can you install RFID card reader on the turnstile?
Yes,except the RFID card reader system,we also can install fingerprint reader system,token system,esd system,etc.
2. How about the guarantee and after sale service?
We have 12 month quality guarantee, We own well-trained and passional sales & after- sale services who can speak fluent English language
3. How long is the leading time?
For standard item
10-50 sets:5 working days
50-100 sets:7-10 working days
200-500 sets:10-15 working days
For special item, or need custom design package or logo, need 3-10 working days longer
4. How about the payment terms?
TT,western union,L/C,our company already joined the trade assurance,it will highly protect your order security.
5. How do you send the product to me,how long?
For sample,normaly send by air or express,about 3-5 days
For quantity purchase,normally by sea, it normally takes 7-60 days depend on different countries.
6. Can you do OEM service?
We offer below OEM services:
1)We can make custom design turnstile,or you tell me your requirements ,we can make a design for you.
2)Can print your logo on turnstiles, can customize the retail box packing and other things.
7. How can we contact with you immediately?
We got several kinds of communicate ways, just hope to keep good touch with you